Table Top & Coating Epoxy Resin – 1:1 Mix
Table Top & Coating Epoxy Resin – 1:1 Mix
Description
Clear epoxy resin for table tops, coatings, doming, resin artwork and other projects where a smooth, glossy surface is required.
Key specifications
- Mix ratio: 1:1 by volume
- Touch dry: 5–6 hours
- Full cure: 24–36 hours, up to 48 hours in colder environments
- Heat resistance: up to 80°C / 176°F
- Maximum top-coat depth: 0.5cm
- Recommended top-coat depth: 3–5mm
- Mixed viscosity: approx. 3500 CPS
- Self-levelling with natural defoaming properties
- UV resistant
Coating and doming
The slightly thicker viscosity provides control for top coats and doming, while the self-levelling formula helps create a smooth finish. It can also level over decals, stickers and thicker vinyl materials.
Recommended uses
- Countertops and bar tops
- Resin artwork and decorative finishes
- Furniture top coatings
- Decals, stickers and vinyl sealing
- Small castings such as coasters or jewellery
Mixing
Use equal parts resin and hardener by volume. The original product guidance describes the formula as low odour, VOC-free and BPA-free, and food safe once fully cured.
Browse our Epoxy Resin for Casting & Woodturning, Mica Powder, or visit our Resin Casting Supplies & Guides.
When will I get my order?
In-stock items are normally packed the same day and dispatched the next working day.
If a mould is out of stock, we usually make it within around 2 working days, ready for dispatch the following working day.
Once your order has been dispatched, you'll receive an email with further information. Delivery time after dispatch will depend on the delivery service and destination.
